The Coax Mapper can test CATV and the safe security system of construction wiring
It can use four ID to direct a lot of coaxial cable to connect and create tone signal to find coaxial cable. It is easy use and test coaxial cable.
Coax Mapper hardware include one the lead plane and four ID(ID1=red color,ID2=blue color, ID3=orange color,ID4=green color, ID5=yellow color,ID6= purple color, ID7= brown color,ID8= gray color).
For the practice application, it can test F and BNC connect of coaxial cable. The lead plane can connect the one of coaxial cable end and the other end connects to ID. User can push test key. If the lead plane found ID, the ID led will on and buzzer has one sound. If it have open breakdown, the open led on and buzzer have two sounds. If it have short breakdown, the short led on and buzzer have three sounds.
Caution: Coax Mapper can not connect to AC or DC power adapter. Before test, user must confirm the coaxial cable of two sides can not connect any equipment.
TONE creates operating instruction: Push test key still three second, Tone led will flash. The state is tone create model. After thirty second, the machine will auto off. Push test key again, the machine will off.
Battery operating instruction: If battery power is weak, the battery led will flash. User must exchange 9V battery.